User Setup
Create a user setup for the mobile user. Scan Work Center field must be blank to see all routing steps.
Picking Ticket Function
It is required for Work Orders.
Work Order Setup
Product Stage and Product Ingredient fields must be updated manually.
System will populate Batch No. automatically upon Work Order creation.
Must create and register pick.
Pick Status must be Full before scanning.
How to Scan Input and Output
Scan Work Order # to display the current open Routing Step.
For the first step, click Output.
Scan Container No. and Quantity, then click Save.
To add another Output, click the Output button.
Must click New first to create a new container.
Do not update Scan Output Container then Save. It will overwrite the previous container information.
All Input and output containers are stored in the Regiater Work table.
Output containers are also stored in Output Container table.
Post to consumer inventory picked for the work order.
Error if Pick Status != Full
System will display the next Routing Step automatically.
Click Input to scan input containers.
Error if the Container # is not scanned before for this work order.
Ensure all scanned containers belong to the same work order
Total Output Qty for all containers cannot be more than input quantity of the routing step. Done
When scanning input container
When clicking output button, make sure all containers are scanned for input, except for the first routing step. Done
Note:
Multiple input containers may exist
Display an error if not all containers for the work order are scanned
Notes:
Multiple input/output containers may exist
Can scan user information or manually enter user details
Raw materials are consumed automatically based on standard setup (no need to scan raw materials)
Lot Number will be assigned at the last step of the routing process
Can you display container # below Scan Input Container line? Done
Objective: Split the existing data entry page into two separate pages for more efficient input and output tracking.
Page 1: Input Data Collection
Line Clearance from QA
Verified by: User input or barcode scan
Process Start/End Time
Start and End timestamps for the process
Who Performed the Task
Logged by: User input or barcode scan
Secondary Signoff Verification
Verified by: User input or barcode scan for task completion
Work Center Cleaning Start/End Time
Track start and end times of cleaning
Who Performed Work Center Cleaning
Logged by: User input or barcode scan
Secondary Signoff for Cleaning
Verified by: User input or barcode scan for equipment cleaning
Scan Input Container
Page 2: Output Data Collection
Scan Output Container
Enter Output Weight/Volume
Date/Time of Output Creation
Automatically captured by the system.
Who Performed the Task
Logged by: User input or barcode scan
Secondary Signoff Verification
Verified by: User input or barcode scan for output verification
Creating a New Object: Container
Container Data Fields:
Container No.
Work Order
Routing Step
Operation No.
Output Item
Output Quantity
Unit of Measure
Work Order Lot Number
Batch Number Management
Batch Number Format:
3 digits (e.g., 001, 002, etc.)
Resets annually to start from 001
Batch Number Assignment:
Automatically assigned when creating a new Work Order
Lot Number Assignment:
Lot Number is assigned during output posting. Pre-configured fields may be used based on the Work Order.
Key Questions:
Mixed Container Situations:
How should inventory be deducted on the Work Order?
Solution: Deduct inventory using picked quantity for the Work Order
Container Number and Allocation/Shipping:
How does the Container Number relate to allocation and shipping?
Solution: Use the Lot Number for shipping